1 review for 1″ NPT Hall Sensor Flow Meter
Only logged in customers who have purchased this product may leave a review.
1″ NPT Hall Sensor Flow Meter
$30.95
In stock
Product Info
304 Stainless Steel 1″ NPT Hall Sensor flow meter for Smart Recirculation Control.
3-pin female JST connector
Black: GND, red: VCC, yellow: PULSE.
Working voltage 3.3v – 18v.
Max Operating Current: 15mA
Flow Range: 4 – 60 L/min (1.06-15.85 GPM)
Out Pulse High Level: If the input is 5V, the output high level is above 4.5V
Out Pulse Low Level: If the input is 5V, the output low level is below 0.5V
Flow formula F = (5Q – 3) ±10% where F is the pulse frequency in Hz and Q is the flow in l/min
Insulation Resistance: >100MOhm
Operating Temperature: 32°F-176°F (0°C – 80°C)
Lead Length: ~13″-14″
Stainless steel with plastic turbine
Safe for potable water
Maximum working pressure 1.75MPa
Return & Refund Policy
The Smart Recirculation Control comes with a 90 day, no questions asked, money back guarantee. If after installing the Smart Recirculation Control you are dissatisfied FOR ANY REASON WHATSOEVER with the performance of the Smart Recirculation Control, simply package up the unit and return it to us with a note explaining what about the product you are dissatisfied with and we will refund your purchase price, minus the original shipping charges. This guarantee only applies to our controllers. AquaMotion Pumps and AMK-ODR valves are excluded from this guarantee once they have been installed.
Shipping Info
- Free shipping to US and Canada on orders over $150.00.
- Usually ships within 2 business days.
Installation Guides
All of our installation guides can be found on the Installation Guides page.
Customer Reviews
Description
304 Stainless Steel 1″ NPT Hall Sensor flow meter for Smart Recirculation Control.
3-pin female JST connector
Black: GND, red: VCC, yellow: PULSE.
Working voltage 3.3v – 18v.
Max Operating Current: 15mA
Flow Range: 4 – 60 L/min (1.06-15.85 GPM)
Out Pulse High Level: If the input is 5V, the output high level is above 4.5V
Out Pulse Low Level: If the input is 5V, the output low level is below 0.5V
Flow formula F = (5Q – 3) ±10% where F is the pulse frequency in Hz and Q is the flow in l/min
Insulation Resistance: >100MOhm
Operating Temperature: 32°F-176°F (0°C – 80°C)
Lead Length: ~13″-14″
Stainless steel with plastic turbine
Safe for potable water
Maximum working pressure 1.75MPa
Additional information
| Weight | 0.5 lbs |
|---|
jay d. (verified owner) –
This was an exchange for the 3/4 sensor which was not the size of the 1 in inlet pipe. Neither were installed, I but tested the sensor with the control using an air compressor. Leridian was easy to reach and although they said most of their customers used the 3/4 which I too could have used, I chose to buy the 1 in instead. Note my outlet pipe is 3/4 in. The extra cost was not an issue and the return was not an issue.