1 review for LEED Smart Aquastat Control 32
Only logged in customers who have purchased this product may leave a review.
LEED Smart Aquastat Control 32
$229.95 – $236.95
Product Info
Leridian Dynamics, Inc. fourth generation flow meter based, LEED for Homes v4 compliant “on demand” Smart Aquastat Control 32 for homes with dedicated recirculation loops. This controller can be configured and upgraded with your smartphone and supports “Live Data,” “Smart Timers” and logging.
Satisfies CA Title 24 requirements
Return & Refund Policy
The Smart Recirculation Control comes with a 90 day, no questions asked, money back guarantee. If after installing the Smart Recirculation Control you are dissatisfied FOR ANY REASON WHATSOEVER with the performance of the Smart Recirculation Control, simply package up the unit and return it to us with a note explaining what about the product you are dissatisfied with and we will refund your purchase price, minus the original shipping charges. This guarantee only applies to our controllers. AquaMotion Pumps and AMK-ODR valves are excluded from this guarantee once they have been installed.
Shipping Info
- Free shipping to US and Canada on orders over $150.00.
- Usually ships within 2 business days.
Installation Guides
All of our installation guides can be found on the Installation Guides page.
Customer Reviews
Description
LEED Compliant Demand-Sensing Hot Water Recirculation Control
LEED Smart Aquastat Control for Homes with a Dedicated Recirculation Loop
✓ Implements LEED for Homes V4 requirements
✓ Satisfies CA Title 24 requirements
✓ Configurable via Bluetooth Enabled Smart Phone App
✓ See real-time flow and temperature values via Live Data™
✓ Proudly designed and made in the U.S.A.
The LEED compliant Smart Aquastat Control 32 is an “On-Demand’ smart hot water recirculating pump controller for homes with a dedicated recirculation loop (If you don’t have a dedicated recirculation loop check out our Smart Thermostatic Control). The microprocessor-based design senses when hot water is drawn from any plumbing fixture and runs the recirculation pump until one of the three LEED criteria is met:
- the water in the recirculation loop reaches 105F (the default programmed max temperature)
- the water in the recirculation loop increases by 10F degrees (the default temp increase value)
- The pump runs for 5 minutes (the default max pump run time)
The LEED Smart Aquastat Control 32 will work with all types of water heaters.
To operate go to any faucet and turn the hot water on then off. The LEED Smart Aquastat Control 32 senses this minimal draw checks the water temperature in the loop, and if necessary, starts the pump running. Within seconds the water loop is hot and you are able to draw hot water.
Because the LEED Smart Aquastat Control 32 uses the demand of hot water to know when to run the pump, it works even when your washing machine or dishwasher needs hot water. Unlike other on-demand hot water systems, there is no need to install switches or sensors at each faucet location and run wires or maintain wireless transceivers.
John M. (verified owner) –
Does exactly what it says. We went from running the circulator continuously to just 4 hours a day with no apparent change in hot water availability. We have a big loop and this solves the problem perfectly.